ARISS Triac Dimmer
(ARS-TD-11)
Downloads
Discreption
The ARISS Triac dimmer (ARS-TD-11) is a single-channel, WiFi-enabled IoT device that can control phase-cut dimmable lights. It doesn't require any special wiring and can be easily installed inside an existing switchboard due to its compact form factor. Lights can be controlled using an app, voice-enabled devices, and even a switch.
ARISS Triac dimmer offers convenient features such as remote control and scheduling, allowing you to adjust your lights even when you're not at home. It also supports integration with other smart home devices for even more control options
Main Features
-
No special wiring is required.
-
Soft start function
-
The memory of the last lighting level settings
-
Option to set minimum and maximum brightness
-
APP and Voice Control
-
WiFi IoT (Internet of Things)
-
5 Years of Warranty
-
Works with Phase-cut /Triac Dimmer
-
Smart pairing - making it simple to set up
-
Works with Bell switches
Specifications
.png)
Important Safety Information
Before installing this device, please read the manual thoroughly. Failure to follow the guidelines outlined in the manual can result in dangerous situations and potential legal violations. ARISS Technology Pvt. Ltd. will not be held liable for any losses or damages incurred as a result of not adhering to the instructions provided in the manual
-
WARNING: POTENTIAL FOR ELECTROCUTION
-
This device is intended for use within electrical home installations. Improper use or connections can lead to fire or electrical shock.
-
All repairs and maintenance on the device should only be performed by a qualified and licensed electrician, in accordance with local regulations.
-
Even when the device is turned off, there may still be voltage present at its terminals.
-
To prevent the risk of electrical shock, do not handle the device with wet or moist hands
-
Do not Modify
-
Do not modify this device in any way not included in this manual
-
Other Devices
-
ARISS Technology Pvt. Ltd. will not be liable for any damages or loss of warranty for other connected devices if the connection is not made in accordance with the instructions provided in their respective manuals.
Before Installation
Incorrect installation can pose a risk to health and safety, and cause property damage.
-
Do not turn on the device until it has been fully assembled in a safe environment. Refer to the operating/maintenance manual of the device you wish to control to ensure the connection is safe and permissible.
-
Connect the device only as outlined in the diagram.
-
Ensure that the same power source is used for the L and N terminals.
-
Do not connect devices that do not comply with the specifications or relevant safety standards.
-
For optimal wireless performance, do not install the device in metal boxes or on metal surfaces.
Notes for Diagram
-
L – terminal for Live wire
-
L(out) – Output terminal
-
S – Terminal for switch ( Support only Bell Switch)
-
N – terminal for Neutral wire
-
P - Pairing Button
Electrical connection
1​
Disconnect the main power source by turning off the fuse or disabling the power supply
2
Connect the module in accordance with the connections shown in the diagram
3
Verify the correctness of the connection.
4
Tighten the terminal screws using the screwdriver.
5
Input the Wi-Fi network password.
6
Reset the module, Press and hold the pairing button for 7 seconds. you will hear a series of beeps or “Di-Di-Di-Di” sound from the module
7
Add the device to the Smart Life APP (see the next chapter).
Note:
ARISS Triac Dimmer module (ARS-TD-11) can only work with the Bell Switch / Push Button.
To control a light dimmer with a switch:
-
Press the bell switch once to turn the light on or off. The light will turn on at its previous set brightness level.
-
To adjust the brightness, press and hold the bell switch. The light's brightness will gradually increase.
-
Release the switch when the desired brightness level is reached. The light will stay at that level.
APP Downloads
.png)
Incorrect installation can pose a risk to health and safety, and cause property damage.
Adding Device to the APP
-
WiFi Network has to be 2.4Ghz
-
Location & Bluetooth has to be ON
-
Place your smartphone close to the module during configuration and ensure that you have at least a 50% Wi-Fi signal
1
Ensure that your phone is connected to a Wi-Fi network and that Bluetooth and location services are enabled
2
Reset the device. Press and hold the pairing button on the module for 7 seconds, until you hear a series of beeps or “Di-Di-Di-Di” sound from the module
3
In the SmartLife app, tap the plus icon in the top right corner to add a new device
4
Select the ‘Add’ button as indicated in the illustration
5
Input the Wi-Fi network password.
.png)
​If you encounter any difficulties while adding the device, reset it and repeat the adding process
Reset Device
-
Press Switch 10 times ( Keep time interval not too short )
-
A continuous series of beeps (Di-Di-Di...) indicates that the reset has been successfully completed.
ARISS Triac Dimmer module can only work with the Bell Switch / Push Button.
Voice Integration
​If you encounter any difficulties while adding the device, reset it and repeat the adding process
1. Complete product networking configuration in the App
Complete the device’s networking configuration by following the prompts in the app.
Note: In the app, change the device’s name to something easily identifiable, such as “Bedroom Light.” Keep in mind that device names are usually in English
2. Configure the Amazon Alexa / Google Home Device
To configure Alexa Echo or Google Home, follow the instructions in the device manual for Alexa or Google Home configuration.
3. Add Smartlife Skill on Amazon Alexa / Google Home Device
To integrate Alexa or Google Home with the smart life app, click on the Alexa/Google Home button in the settings tab of the device and enter smart life APP login details
.png)
4. Common Commands
Now you can control your smart device with voice commands using Echo. For example, you can control your bedroom light with the following commands
Alexa / Hey Google, Turn ON/OFF [ Device Name ]
Alexa / Hey Google, Switch ON/OFF [ Device Name ]
Alexa / Hey Google, Set [ Device Name ], to [ % ]
Alexa / Hey Google, Turn ON/OFF [ Device Name ] at [ % ]
Alexa / Hey Google, Decrease [ Device Name ] Brightness
Resetting to factory defaults
To reset the device to its factory default settings, go to the device settings, click on the “Remove Device” button, and then click on “Disconnect and Wipe Data.” The device will then be reset to its factory default settings
.png)
If you have any further questions about the installation and configuration process, please contact our support team. You can reach us at info@ARISS.io
ARISS is a brand for anyone interested in using high-quality smart home devices to enjoy a whole-house intelligent lifestyle. Our mission is to design and provide comprehensive solutions to house devices for the enjoyment of our honoured customers.
Warranty Policy
Copyrights © 2022 ARISS. Privacy Policy