top of page
ARISS Double Switch.png

ARISS Double Switch

(ARS-DS-21)
Downloads

Downloads

ARISS Double Switch Manual (ARS-DS-21 - Ver.1)
  • Youtube

Device How-to-Video

Discreption

Discreption

The ARISS Double Switch (ARS-DS-21) is a retrofit WiFi module that allows you to control two switches individually through a simple and easy-to-use APP or manual switch. This product is unique because it doesn't require any special wiring and works with existing switches. It is a true residential IoT product that can be upgraded over the air and is modularly upgradeable, so customers can keep adding devices as needed. The product has been designed by industry experts with over a decade of experience and has been built from the ground up. With this retrofit module, you can control lights, fans, and other appliances from anywhere, and schedule them to turn on or off at specific times, giving you more control over your energy consumption and home comfort.

Main Features

Main Features

  • No special wiring is required.

  • Works with existing switches

  • APP and Voice Control

  • WiFi IoT (Internet of Things)

  • 5 Years of warranty

  • Easy to Install and Use

Specifications

Specifications

image.png
Safety Infomation

Important Safety Information

Before installing this device, please read the manual thoroughly. Failure to follow the guidelines outlined in the manual can result in dangerous situations and potential legal violations. ARISS Technology Pvt. Ltd. will not be held liable for any losses or damages incurred as a result of not adhering to the instructions provided in the manual

  • WARNING: POTENTIAL FOR ELECTROCUTION

  • This device is intended for use within electrical home installations. Improper use or connections can lead to fire or electrical shock.

  • All repairs and maintenance on the device should only be performed by a qualified and licensed electrician, in accordance with local regulations.

  • Even when the device is turned off, there may still be voltage present at its terminals.

  • To prevent the risk of electrical shock, do not handle the device with wet or moist hands

  • Do not Modify

  • Do not modify this device in any way not included in this manual

  • Other Devices

  • ARISS Technology Pvt. Ltd. will not be liable for any damages or loss of warranty for other connected devices if the connection is not made in accordance with the instructions provided in their respective manuals.

Before Installation

Before Installation

Incorrect installation can pose a risk to health and safety, and cause property damage.

  • Do not turn on the device until it has been fully assembled in a safe environment. Refer to the operating/maintenance manual of the device you wish to control to ensure the connection is safe and permissible.

  • Connect the device only as outlined in the diagram.

  • Ensure that the same power source is used for the L and N terminals.

  • Do not connect devices that do not comply with the specifications or relevant safety standards.

  • For optimal wireless performance, do not install the device in metal boxes or on metal surfaces.

Installation Video

Installation - Video Tutorial

Installation

Notes for Diagram

  • S2 – Terminal for 2nd Button

  • L2 – Output terminal of the 2nd channel

  • S1 – Terminal for 1st Button

  • L1 – Output terminal of the 1st channel

  • L – terminal for Live wire

  • N – terminal for Neutral wire

  • P – Pairing Button

Electrical connection

1​

Disconnect the main power source by turning off the fuse or disabling the power supply

2

Connect the module in accordance with the connections shown in the diagram

Mobile Website Templates (16).png

3

Verify the correctness of the connection.

4

Tighten the terminal screws using the screwdriver.

5

Input the Wi-Fi network password.

6

Reset the module, Press and hold the pairing button for 7 seconds. you will hear a series of beeps or “Di-Di-Di-Di” sound from the module

7

Add the device to the Smart Life APP (see the next chapter).

APP Download

The ARISS Double switch is compatible with three types of switches:
1. Bell switch 

2. Toggle switch 

3. Two-way switch

APP Downloads

Mobile Website Templates (17).png

Incorrect installation can pose a risk to health and safety, and cause property damage.

Device APP Configration

Adding Device to the APP

  • WiFi Network has to be 2.4Ghz

  • Location & Bluetooth has to be ON

  • Place your smartphone close to the module during configuration and ensure that you have at least a 50% Wi-Fi signal

1

Ensure that your phone is connected to a Wi-Fi network and that Bluetooth and location services are enabled

2

Reset the device. Press and hold the pairing button on the module for 7 seconds, until you hear a series of beeps or “Di-Di-Di-Di” sound from the module

3

In the SmartLife app, tap the plus icon in the top right corner to add a new device

4

Select the ‘Add’ button as indicated in the illustration

5

Input the Wi-Fi network password.

Mobile Website Templates (18).png
Reset Device

​If you encounter any difficulties while adding the device, reset it and repeat the adding process

Reset Device

Long press the pairing button on the module until you hear a series of beeps or "Di-Di-Di-Di" sound from the module

Mobile Website Templates (19).png
RF Remote Pairing

RF Pairing Method

There are two methods to pair the RF remote with the module:

Method 1. Via Switch Connected to S1/S2

1

Press the switch 10 times ( ON/OFF cycle 5 times). The module will emit “Di-Di” sounds as a confirmation

2

Quickly press the RF button 3 times.

Repeate same process for Switch 1 and Switch 2

Method 2. Through Pairing Button on the module

Pairing Procedure for Switch 1 (Load 1)

1

Press the pairing button once, and the module will emit a “Di” sound as confirmation.

2

Then, press and hold the pairing button, and the module will emit a “Di-Di” sound as confirmation.

3

Immediately after hearing the “Di-Di” sound, quickly press the RF switch 3 times

Pairing Procedure for Switch 2 (Load 2)

1

Press the pairing button twice, and the module will emit a “Di” sound as confirmation.

2

Then, press and hold the pairing button, and the module will emit a “Di-Di” sound as confirmation.

RF Reset Method

3

Immediately after hearing the “Di-Di” sound, quickly press the RF switch 3 times

RF Reset Method

There are two methods to reset the RF remote with the module:

Method 1. Via Switch Connected to S1/S2

1

Press the switch 10 times ( ON/OFF cycle for 5 times), and the module will emit a “Di-Di” sound as confirmation.

2

Wait for 3 Sec.

3

Again Press the switch 10 times ( ON/OFF cycle for 5 times), and you will hear a “Di-Di-Di-Di” sound indicating that the clearing was successful

Repeate same process for Switch 1 and Switch 2

Method 2. Switch Connected to S1/S2

1

Press the pairing button once, and the module will emit a “Di” sound as confirmation.

2

​Then, press and hold the pairing button, and the module will emit a “Di-Di” sound as confirmation.

3

​Wait 3 Seconds

4

Then, press and hold the pairing button, and the module will emit a “Di-Di-Di-Di” for successful clearing.

Voice Integration

Voice Integration

​If you encounter any difficulties while adding the device, reset it and repeat the adding process

1. Complete product networking configuration in the App

Complete the device’s networking configuration by following the prompts in the app.

Note: In the app, change the device’s name to something easily identifiable, such as “Bedroom Light.” Keep in mind that device names are usually in English

2. Configure the Amazon Alexa / Google Home Device

To configure Alexa Echo or Google Home, follow the instructions in the device manual for Alexa or Google Home configuration.

3. Add Smartlife Skill on Amazon Alexa / Google Home Device

To integrate Alexa or Google Home with the smart life app, click on the Alexa/Google Home button in the settings tab of the device and enter smart life APP login details

Mobile Website Templates (20).png

4. Common Commands

Now you can control your smart device with voice commands using Echo. For example, you can control your bedroom light with the following commands

​

​Alexa/ Hey Google, Turn ON/OFF [ Device Name ]
Alexa/ Hey Google, Switch ON/OFF [ Device Name ]
Alexa/ Hey Google, [ Device Name ] ON/OFF
Alexa/ Hey Google, ON/OFF [ Device Name ]

Reset Factory Default

Resetting to factory defaults

To reset the device to its factory default settings, go to the device settings, click on the “Remove Device” button, and then click on “Disconnect and Wipe Data.” The device will then be reset to its factory default settings

Mobile Website Templates (21).png

If you have any further questions about the installation and configuration process, please contact our support team. You can reach us at info@ARISS.io

bottom of page